Isoacoustics ISO-155 (pair) Isolation Stand for Medium Sized Studio Monitors
“I’ve been using the IsoAcoustics stands for several years now, both on my small near fields and my larger mid fields. They sound bigger, better, and just the stereo imaging is terrific, the low end is really tight and concise.” – Frank Filipetti, Six time Grammy-winning music producer and engineer (Carly Simon, Barbra Streisand, Vanessa Williams, George Michael, 10,000 Maniacs, Lauren Kinhan, James Taylor and Elton John)
“The IsoAcoustics ISO-155 are a great example of specialist on-desk stands that provide the isolation and elevation needed to mix and master accurately.” – Chris Corfield, MusicRadar
“Out of all the products you could upgrade in your studio, this is the biggest sound changer you can make for the dollar.” – Jim Pavett, Pure Wave Audio
“Suddenly, there was more air, more breathing room. The size of the soundstage grew. The effect of these stands was not subtle.” – Wes Marshall, SoundStage! Xperience
“I admit that I did not think they would make such a clear and positive improvement. But they did… they will in short make your speakers more enjoyable to listen to and that is more than worth the price of admission.” – Michael Lavorgna, AudioStream
“If getting your speakers in the right position and damping vibration is your main concern, these iso stands do a great job, offering a novel and attractive approach to supporting desktop speakers and incorporating effective damping.” – Paul White, Sound On Sound
The best investment you can make for superior audio
The ISO Stands are the latest generation of IsoAcoustics stands designed for studio monitors. The ISO Stands are an updated version of the popular ISO-L8R series and features a lower profile, new frame design and a newer version of isolator for improved performance. The ISO-155 isolation stand is 6.1” (155mm) wide x 7.5” (190mm) depth and is rated for monitors weighing up to 40lbs.
Offering 14 variations of height and tilt, the ISO-155 will help you optimize the placement of your monitors and bring your tweeters to ear level. The IsoAcoustics patented isolation system provides superior isolation and decoupling from the supporting surface. The stands are biased to keep all energy in alignment with the speaker cones, providing greater clarity and focus.
Dimensions Short Setting (WxDxH): 6.1” x 7.5” x 3 (155mm x 190mm x 76mm)
Dimensions Tall Setting (WxDxH): 6.1” x 7.5” x 8.2 (155mm x 190mm x 210mm)
Tilt: up to 6.5 degrees
Weight Cap Short setting: 40lbs (18KG)
Weight Cap Tall setting: 35lbs (16KG)
Quantity: 2 Stands (1 Pair)
Optimize speaker placement and focus
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener and eliminate soundwave reflections off the supporting surface.
In a typical Desktop Audio Workstation (DAW) configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics stands.
Exciting the supporting surface and reducing internal reflections
The isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area or joining rooms.
Internal reflections are vibrations reflecting back up the speaker cabinet which causes smear. Smear is a result of artifacts replicated in both channels which are perceived to be in the middle, causing the stereo image to collapse. The IsoAcoustics isolators reduce internal reflections to eliminate smear. The result is an improved stereo image of natural spatial sound.
Meet With A Passionate Product Specialist
Our sales staff are on hand to answer all of your questions. Whether you’re picking up your next microphone, an audio interface or planning a new studio from the ground up, we can help. Contact us or visit our showroom