Focal Alpha 80 EVO (pair)

Price is for one pair of speakers

“A well-designed balance of clarity, depth, fullness and affordability.” – Recording Magazine

“The Alpha 80 meets Focal’s goal of creating a musician-friendly monitor that excels in low-frequency reproduction and should play loud enough to rouse the neighbours. ..a smooth, accurate midrange, stable imaging and the ability to tailor the monitor’s response to complement its surroundings. Other monitors at a similar price point don’t offer the extended low-end reproduction of the Alpha 80.” – Steve La Cerra, Mix Magazine

Active 2-way near field professional monitor speakers

Flagship line Alpha 80 Evo is particularly recommended for professionals seeking high volumes and a rich sub-bass extension. This monitor has a 1” (25mm) aluminium inverted dome tweeter and a woofer with a Slatefiber cone, made in France by Focal. Its large laminar vent allows you to significantly limit noises and its dual amplification offers a frequency response from 8Hz to 22kHz (+/- 3dB)..

Alpha 80 Evo is characterised by excellent dynamics, an impressively neutral tonal balance and multiple features (inserts for wall mounting, automatic disengageable stand-by, etc.).

The Alpha Evo monitors are made from a 5/8” (15mm)-thick MDF enclosure and incorporates internal braces to ensure the enclosure’s high rigidity, even at the highest levels of sound pressure.

Features

Neutrality across the full sound spectrum

Excellent dynamics for a very low distortion

8” (21cm) Slatefiber cone woofer

Large laminar vent

Identical tonal balance at both low and high volume

Connect up to 3 audio sources

Inserts for wall and ceiling fastening

Automatic disengageable stand-by

Protection grilles included

Specifications

Frequency response (+/- 3dB): 38Hz – 22kHz

Maximum SPL: 106dB SPL (peak @ 1m)

Inputs Connectors: TRS: symmetrical 10kOhms, XLR: symmetrical 10kOhms, RCA: asymmetrical 10kOhms with compensated sensitivity

Medium and low frequency amplifier: 80W

High frequency amplifier: 35W

Automatic stand-by mode: After around 15 minutes of no use By signal detection >6mV

Power supply: 100 – 240V~ (T2AL fuse/250V)

Connection: IEC socket and detachable power cable

Sensitivity: Adjustable, 0 or +6dB

Level midrange/bass (0 – 250Hz): Adjustable, +/-6dB

Treble level (4.5 – 35kHz): Adjustable, +/-3dB

Power on/off: On/off switch on the rear panel

Stand-by consumption: <0.5W

Views and controls: On and off LED – Stand-by LED

Woofer: 8″ (20cm) Slatefiber cone

Tweeter: 25mm (1″) with aluminium inverted dome

Construction: 0.6″ (15mm) MDF

Finish: Black vinyl and paint

Dimensions with 4 rubber feet (HxWxD): 15.35×11.65×13″ (390x296x330mm)

Weight: 21.6lbs (9.8kg)